Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB BOLT

FRONT AXLE HUB BOLT > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with painted surfaces.



3. REMOVE FRONT DISC BRAKE CALIPER ASSEMBLY


F042731
  1. Remove the bolt and separate the brake tube bracket from the steering knuckle.



    C168980
  1. Using a union nut wrench, separate the brake tube from the front disc brake caliper assembly.

    HINT:
    Use a container to collect the brake fluid as it drains out.



    F050211
  1. Remove the 2 bolts and front disc brake caliper assembly.



4. REMOVE FRONT DISC
  1. Place matchmarks on the disc and the axle hub and remove the disc.



5. REMOVE FRONT AXLE HUB BOLT


F044194E01
  1. Using SST and a screwdriver or the equivalent to hold the axle hub, remove the hub bolt.

    SST
    09650-17011