INNER REAR VIEW MIRROR > INSPECTION |
| 1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY |
Check the operation.
![]() |
Connect the battery positive (+) lead to terminal 1 and the negative (-) lead to terminal 2.
| *1 | Battery |
| *2 | Forward Sensor |
| *3 | Black Tape |
| *a | Component without harness connected (Inner Rear View Mirror Assembly) |
| *b | Bright |
| *c | Dark |
Attach black tape to the forward sensor to prevent it from sensing.
Shine an electric light on the inner rear view mirror assembly. Check that the inner rear view mirror assembly surface changes from bright to dark.