Home › BRAKE › BRAKE › FRONT BRAKE

FRONT BRAKE > REASSEMBLY

for Preparation Click here



1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG


2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP


3. INSTALL PISTON SEAL


C190226E02
  1. Apply lithium soap base glycol grease to 4 new piston seals.

  1. Install the 4 piston seals onto the disc brake cylinder.

    NOTICE:
    Securely install the piston seal into the groove of the disc brake cylinder.



4. INSTALL FRONT DISC BRAKE PISTON


C190227E02
  1. Apply lithium soap base glycol grease to the 4 disc brake pistons and 4 new cylinder boots.

  1. Install the 4 cylinder boots to the 4 disc brake pistons.

  1. Install the 4 disc brake pistons onto the disc brake cylinder.

    NOTICE:
    Do not forcibly install the piston into the disc brake cylinder.



5. INSTALL CYLINDER BOOT


C111386
  1. Install the 4 cylinder boots onto the disc brake cylinder.

    NOTICE:
    Securely install the cylinder boot into the grooves of the disc brake cylinder and piston.

  1. Using a screwdriver, install 4 new set rings.

    NOTICE:
    Do not damage the boot.