Home › TRANSMISSION ยท CLUTCH › CLUTCH RELEASE CYLINDER

CLUTCH RELEASE CYLINDER > DISASSEMBLY

for Preparation Click here



1. REMOVE CLUTCH RELEASE CYLINDER KIT
  1. Remove the boot from the cylinder body.

  1. Remove the push rod from the cylinder body.



    F051056
  1. Using compressed air, remove the piston together with the spring from the cylinder.

    NOTICE:
    Do not damage the inside of the cylinder body.

  1. Remove the 2 cylinder piston cups from the piston.

  1. Remove the bleeder plug cap from the bleeder plug.



2. REMOVE RELEASE CYLINDER BLEEDER PLUG