CLUTCH ACCUMULATOR > INSTALLATION |
| 1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY |
![]() |
Install the clutch accumulator with the 3 bolts.
![]() |
Using a union nut wrench, tighten the flexible hose tube.
Install the clutch line bracket with the nut
![]() |
Using a union nut wrench, connect the flexible hose tube.
Install the clutch line bracket with the bolt.
| 2. INSTALL NO. 1 CLUTCH HOUSING COVER |
![]() |
Install the No. 1 clutch housing cover with the 3 bolts.
| 3. INSTALL NO. 2 MANIFOLD STAY |
![]() |
Install the No. 2 manifold stay with the 3 bolts.
| 4. INSTALL NO. 2 EXHAUST FRONT PIPE ASSEMBLY |
Install a new gasket onto the exhaust manifold LH.
Install a new gasket onto the No. 2 front exhaust pipe.
![]() |
Install the front No. 2 exhaust pipe with 2 new nuts and 2 bolts and exhaust pipe support.
![]() |
Install the exhaust pipe stopper bracket with the 2 bolts (for 4WD).
| 5. BLEED CLUTCH PIPE LINE |
Fill the brake reservoir tank with the brake fluid and bleed the clutch system.
| 6. CHECK FOR CLUTCH FLUID LEAKAGE |
| 7. CHECK FLUID LEVEL IN RESERVOIR |