Home › TRANSMISSION ยท CLUTCH › CLUTCH ACCUMULATOR

CLUTCH ACCUMULATOR > REMOVAL

for Preparation Click here



1. DRAIN CLUTCH FLUID


2. REMOVE NO. 2 EXHAUST FRONT PIPE ASSEMBLY


    A129939
  1. Remove the 2 bolts, then remove the exhaust pipe stopper bracket. (for 4WD)



    A129938
  1. Remove the 2 bolts and 2 nuts and separate the exhaust pipe support, then remove the front No. 2 exhaust pipe.



3. REMOVE NO. 2 MANIFOLD STAY


F051648
  1. Remove the 3 bolts and remove the No. 2 manifold stay.



4. REMOVE NO. 1 CLUTCH HOUSING COVER


F050796
  1. Remove the 3 bolts and No. 1 clutch housing cover.



5. REMOVE CLUTCH ACCUMULATOR ASSEMBLY


C133797
  1. Using a union nut wrench, disconnect the flexible hose tube from the clutch accumulator.

    HINT:
    Use a container to catch the fluid.

  1. Remove the bolt and clutch line bracket.



    C133798
  1. Using a union nut wrench, disconnect the flexible hose tube from the clutch accumulator.

  1. Remove the nut and clutch line bracket.



    F050798
  1. Remove the 3 bolts and clutch accumulator.