Home › DRIVE LINE ยท DIFFERENTIAL › DIFFERENTIAL CARRIER ASSEMBLY (w/ Differential Lock)

DIFFERENTIAL CARRIER ASSEMBLY (w/ Differential Lock) > INSPECTION

for Preparation Click here



1. INSPECT REAR DIFFERENTIAL LOCK SLEEVE


G020273
  1. Install the sleeve onto the differential case (LH) and check that it moves smoothly.

  1. Install the side gear onto the sleeve and check that it moves smoothly.



    G020274
  1. Using a feeler gauge, measure the clearance between the shift fork and sleeve.

    Maximum clearance:
    0.15 to 0.35 mm (0.0059 to 0.0138 in.)



2. INSPECT DIFFERENTIAL PINION AND SIDE GEAR
  1. Check that there is no damage to the differential pinion or differential side gear.
    If the differential pinion and/or differential side gear is damaged, replace the differential.



3. INSPECT DIFFERENTIAL CASE
  1. Check that the differential case is not damaged.
    If the differential case is damaged, replace it.