Home › ENGINE › 1GR-FE LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP RELIEF VALVE
  1. Coat the oil pump relief valve with engine oil and insert the oil pump relief valve and relief valve spring into the valve hole.



    A223652
  1. Install the relief valve plug to the oil pump cover.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }



2. INSTALL OIL PUMP COVER
  1. Apply fresh engine oil to the drive and driven rotors.



    A223654E01
  1. Place the drive and driven rotors into the timing chain cover sub-assembly with the matchmarks facing the oil pump cover side.
    Text in Illustration 
    *a
    Matchmark



    A225445
  1. Install the oil pump cover to the timing chain cover sub-assembly with the 8 bolts and screw.
    Text in Illustration 
    V100135
    Bolt
    V100136
    Screw

    Torque:
    for screw:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }
    for bolt:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }