ENGINE COOLANT TEMPERATURE SENSOR > INSPECTION |
| 1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR |

| *a | Component without harness connected: (Engine Coolant Temperature Sensor) | *b | Resistance kΩ |
| *c | Temperature °C (°F) | *d | Acceptable |
Partially immerse the sensor in water and warm up the water.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Approx. 20°C (68°F) | 2.32 to 2.59 kΩ |
| Approx. 80°C (176°F) | 0.310 to 0.326 kΩ |