Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL TRANSMITTER

DOOR CONTROL TRANSMITTER > REMOVAL

for Preparation Click here



1. REMOVE TRANSMITTER HOUSING COVER


    B179418
  1. Remove the screw and remove the transmitter housing cover.

    NOTICE:
    Do not pry out the transmitter housing cover forcibly.

    HINT:
    Slide the transmitter housing cover with a finger as shown in the illustration, so that there is a small gap, then remove the transmitter housing cover by lifting the hook through the gap.



2. REMOVE DOOR CONTROL TRANSMITTER


    B174463
  1. Remove the door control transmitter.