Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL TRANSMITTER

DOOR CONTROL TRANSMITTER > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL TRANSMITTER


    B174463
  1. Install the door control transmitter.



2. INSTALL TRANSMITTER HOUSING COVER


    B179417
  1. Install the transmitter housing cover with the screw.

    HINT:
    Slide the transmitter housing cover with a finger as shown in the illustration.

    NOTICE:
    If the screws are loose, it may cause faulty contact between the battery (lithium battery) and the terminals.