TIRE PRESSURE WARNING SYSTEM > TC and CG Terminal Circuit |

| 1.CHECK HARNESS AND CONNECTOR (TIRE PRESSURE WARNING ECU - DLC3) |
Disconnect the E74 tire pressure warning ECU connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| E74-3 (TC) - E1-13 (TC) | Always | Below 1 Ω |
| E74-3 (TC) - Body ground | Always | 10 kΩ or higher |
| E1-4 (CG) - Body ground | Always | Below 1 Ω |
|
| ||||
| OK | ||
| ||