Home › BODY ELECTRICAL › LIGHTING › LIGHTING SYSTEM

LIGHTING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZE LIGHTING SYSTEM

HINT:
The following items can be customized.

CAUTION:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the Techstream tester.

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Utility / Customize / Illuminated Entry or Light Control.

    5. Select the setting by referring to the table below.

      Illuminated Entry 
      Display
      Default
      Content
      Setting
      I/L when ACC OFF
      ON
      Lights up the room light, rear room light and ignition switch illumination when the ignition switch is turned from ACC to off.
      OFF/ON
      Lighting Time
      15 s
      Changes the lighting time of the room light, rear room light and ignition switch illumination after closing all of the doors. (It will quickly fade out in case of turning the ignition switch to ON.)
      15 s/7.5 s/30 s
      I/L ON W/Unlock
      ON
      Lights up the room light, rear room light and ignition switch illumination when a door is unlocked.
      OFF/ON

      Light Control 
      Display
      Default
      Content
      Setting
      Light Auto OFF Delay
      30 s
      Function to keep on lighting the headlight for a certain period of time after closing all the doors with the ignition switch turned OFF from ON under the condition that the light control switch is at HEAD or AUTO with the headlight ON.
      OFF/30 s/60 s/90 s