Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY (w/o CRAWL)

PERSONAL LIGHT ASSEMBLY (w/o CRAWL) > INSTALLATION

for Preparation Click here



1. INSTALL PERSONAL LIGHT BULB


B205293
  1. Install the personal light bulb into the light socket.

  1. Turn the personal light bulb socket and bulb, in the direction indicated by the arrows in the illustration.



2. INSTALL PERSONAL LIGHT ASSEMBLY


B205291
  1. Connect the connector.

  1. Engage the 4 claws and install the personal light.



3. INSTALL NO. 1 PERSONAL LIGHT LENS


B208606
  1. Engage the 3 claws and install the No. 1 personal light lens.



4. INSTALL NO. 2 PERSONAL LIGHT LENS

HINT:
Perform the same procedure as for the RH side.