Home › BODY ELECTRICAL › LIGHTING › ROOM LIGHT ASSEMBLY

ROOM LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL ROOM LIGHT ASSEMBLY
  1. Install room light bulb No. 1.



    B138414
  1. Engage the 4 claws and install the room light switch base.

  1. Install the roof wire into the claw of the room light.



    E114445
  1. Engage the 4 claws and install the room light.



    E114446
  1. Engage the 4 claws and install the room light lens.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }