Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER RUBBER

REAR WIPER RUBBER > INSTALLATION

for Preparation Click here



1. INSTALL REAR WIPER RUBBER


E059361E02
  1. Install the 2 wiper rubber backing plates onto the wiper rubber.

    NOTICE:
    Install the backing plates facing the correct direction.



    E037635
  1. Install the wiper rubber with its head portion (swelled portion) facing the arm bearing.

    NOTICE:
    Push the wiper blade into the grooves of the wiper rubber to attach it completely.



2. INSTALL REAR WIPER BLADE ASSEMBLY


E114483
  1. Engage the claw and install the wiper blade.