Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WIPER RUBBER

FRONT WIPER RUBBER > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE FRONT WIPER BLADE


    E114482
  1. Disengage the claw as shown in the illustration.

    NOTICE:
    Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.



2. REMOVE FRONT WIPER RUBBER


E107954
  1. Remove the wiper rubber from the wiper blade.



    E059361E02
  1. Remove the 2 wiper rubber backing plates from the wiper rubber.