Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER RUBBER

REAR WIPER RUBBER > REMOVAL

for Preparation Click here



1. REMOVE REAR WIPER BLADE ASSEMBLY


    E114482
  1. Disengage the claw as shown in the illustration.

    NOTICE:
    Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.



2. REMOVE REAR WIPER RUBBER


E107954
  1. Remove the wiper rubber from the wiper blade.



    E059361E02
  1. Remove the 2 wiper rubber backing plates from the wiper rubber.