Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER SWITCH


    E127813
  1. Install the wiper switch with the 2 screws.

  1. Connect the connector.



2. INSTALL UPPER STEERING COLUMN COVER


    C231841
  1. Engage the claw and install the upper steering column cover.



3. INSTALL LOWER STEERING COLUMN COVER


    C133807
  1. Engage the 2 claws.

  1. Install the lower steering column cover with the 3 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }