Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE LOWER STEERING COLUMN COVER


C133807
  1. Remove the 3 screws.

  1. Disengage the 2 claws to remove the lower steering column cover.



3. REMOVE UPPER STEERING COLUMN COVER


C231841
  1. Disengage the claw and then remove the upper steering column cover.



4. REMOVE WINDSHIELD WIPER SWITCH


    E127813
  1. Disconnect the connector.

  1. Remove the 2 screws and the windshield wiper switch.