Home › BODY › WINDSHIELD / WINDOWGLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B267119E01
  1. Check the resistance.
    Text in Illustration 
    *a
    Component without harness connected
    (Power Window Regulator Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      3 - 4
      1 - 2
      UP
      Below 1 Ω
      4 - 5
      1 - 2
      OFF
      Below 1 Ω
      4 - 5
      1 - 3
      DOWN
      Below 1 Ω

      If the result is not as specified, replace the power window regulator switch assembly.