BACK DOOR GLASS > ADJUSTMENT |
| 1. INSPECT BACK DOOR GLASS |
Check that the clearance measurements are within the standard ranges.

| Area | Measurement | Area | Measurement |
| A | 8 to 11 mm (0.315 to 0.433 in.) | F | 4.5 to 7.5 mm (0.177 to 0.295 in.) |
| B | 2 to 5 mm (0.079 to 0.197 in.) | G | 2 to 5 mm (0.079 to 0.197 in.) |
| C | 3.5 to 6.5 mm (0.138 to 0.256 in.) | H | 2 to 5 mm (0.079 to 0.197 in.) |
| D | 2 to 5 mm (0.079 to 0.197 in.) | I | 3.5 to 6.5 mm (0.138 to 0.256 in.) |
| E | 4.5 to 7.5 mm (0.177 to 0.295 in.) | - | - |
| 2. ADJUST BACK DOOR GLASS |
![]() |
Adjust the glass position.
Loosen the glass side hinge nuts and adjust the glass position.
Tighten the glass side hinge nuts after the adjustment.