BACK DOOR > ADJUSTMENT |

| 1. INSPECT BACK DOOR |
Check that the clearance measurements are within the standard ranges.

| Area | Measurement | Area | Measurement |
| A | 8.5 to 11.5 mm (0.335 to 0.453 in.) | G | 5 to 8 mm (0.197 to 0.315 in.) |
| B | 0 to 3 mm (0 to 0.118 in.) | H | 3.5 to 6.5 mm (0.138 to 0.256 in.) |
| C | 5.5 to 8.5 mm (0.217 to 0.335 in.) | I | 2.8 to 5.8 mm (0.110 to 0.228 in.) |
| D | 5 to 8 mm (0.197 to 0.315 in.) | J | 5.5 to 8.5 mm (0.217 to 0.335 in.) |
| E | 13.5 to 16.5 mm (0.531 to 0.650 in.) | K | 0 to 3 mm (0 to 0.118 in.) |
| F | -0.9 to 2.1 mm (-0.035 to 0.0827 in.) | - | - |
| 2. ADJUST BACK DOOR |
![]() |
Adjust the door position.
Adjust the door horizontally and longitudinally by loosening the 4 door side hinge bolts.
Tighten the door side hinge bolts after the adjustment.
![]() |
Horizontally and vertically adjust the door by loosening the 8 body side hinge bolts.
Tighten the body side hinge bolts after the adjustment.
![]() |
Adjust the striker position.
Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic hammer.
Tighten the striker mounting screws after the adjustment.
![]() |
Adjust the back door side female stopper.
Adjust the side female stopper so that the door can be opened/closed smoothly, as shown in the illustration.
Tighten the side female stopper bolts after the adjustment.