Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH (for Front Passenger Side)

DOOR CONTROL SWITCH (for Front Passenger Side) > INSPECTION

for Preparation Click here



1. INSPECT DOOR CONTROL SWITCH ASSEMBLY


    E221663E01
  1. Check the resistance.
    Text in Illustration 
    *a
    Component without harness connected
    (Door Control Switch Assembly)
    *b
    LOCK
    *c
    UNLOCK

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      4 (L) - 3 (E)
      Locked
      Below 1 Ω
      OFF
      10 kΩ or higher
      2 (UL) - 3 (E)
      Unlocked
      Below 1 Ω
      OFF
      10 kΩ or higher

      If the result is not as specified, replace the door control switch.