ENGINE IMMOBILISER SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
The transponder key ECU controls the vehicle's immobiliser system functions. Immobiliser system data and Diagnostic Trouble Code (DTC) can be read through the vehicle's Data Link Connector 3 (DLC3).
In some cases, a malfunction may be occurring in the immobiliser system even though the security indicator light is not illuminated.
When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
| CHECK DLC3 |
![]() |
The ECU uses ISO 15765-4 for communication. The terminal arrangement of the DLC3 complies with SAE J1962 and matches the ISO 15765-4 format.
| Symbols (Terminals No.) | Terminal Description | Condition | Specified Condition |
| SIL (7) - SG (5) | Bus "+" line | During transmission | Pulse generation |
| CG (4) - Body ground | Chassis ground | Always | Below 1 Ω |
| SG (5) - Body ground | Signal ground | Always | Below 1 Ω |
| BAT (16) - Body ground | Battery positive | Always | 11 to 14 V |
| INSPECT BATTERY VOLTAGE |
Measure the battery voltage.