Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW REGULATOR MOTOR

POWER WINDOW REGULATOR MOTOR > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


    B121541E01
  1. Check the operation of the regulator motor.

    1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

      Standard:
      Measurement condition
      Specified Condition
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Motor gear rotates clockwise
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor.



2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


    B121543E01
  1. Check the operation of the regulator motor.

    1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

      Standard:
      Measurement Condition
      Specified Condition
      Battery position (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Motor gear rotates clockwise
      Battery position (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor.