Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET

POWER OUTLET SOCKET > INSTALLATION

for Preparation Click here



1. INSTALL POWER OUTLET SOCKET COVER NO.2


    E127826
  1. Engage the 2 claws and install a new power outlet socket cover.



2. INSTALL POWER OUTLET SOCKET


    E127827
  1. Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and install the power outlet socket.

  1. Securely engage the claw.



3. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY


    B133852
  1. Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <F> bolts and 2 clips.



4. INSTALL CONSOLE BOX ASSEMBLY REAR


    B133851
  1. Engage the 5 claws and install the front console box.

  1. Install the 4 <D> screws.



5. INSTALL BOX BOTTOM MAT


    B133899
  1. Install the box bottom mat.



6. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B133897
  1. Engage the 3 claws and 5 clips and install the console upper rear panel.



7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)


    B133896
  1. Install the shift lever knob.



8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


    B133894
  1. Install the shift lever knob.



9. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B133901E01
  1. Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.

  1. Engage the 4 claws and install the parking brake hole cover.



10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }