Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET

POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B133898E02
  1. Disengage the 2 A claws and 2 B claws.

  1. Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 C claws and remove the parking brake hole cover.



3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


    B133893
  1. Remove the shift lever knob.



4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)


    B133895
  1. Remove the shift lever knob.



5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B133897
  1. Shift the shift lever into the N position.

  1. Disengage the 5 clips and 3 claws and remove the console upper rear panel.



6. REMOVE BOX BOTTOM MAT


    B133899
  1. Remove the box bottom mat.



7. REMOVE CONSOLE BOX ASSEMBLY REAR


    B133851
  1. Remove the 4 <D> bolts.

  1. Disengage the 5 claws and remove the console box.



8. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY


    B133852
  1. Remove the 2 clips and 2 <F> bolts.

  1. Disengage the 3 clips and 2 claws and remove the instrument lower cover.



9. REMOVE POWER OUTLET SOCKET


    E127824
  1. Using a screwdriver, disengage the claw, then turn the power outlet socket counterclockwise and push the power outlet socket half way out.



    E127825
  1. Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and then push the power outlet socket out.



10. REMOVE POWER OUTLET SOCKET COVER NO.2


    E127826
  1. Disengage the 2 claws and remove the power outlet socket cover.