Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL RADIO RECEIVER ASSEMBLY


    E221532
  1. Connect the connectors.

  1. Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }



2. INSTALL INTEGRATION CONTROL PANEL ASSEMBLY


    B138488
  1. Connect the blower switch connector and the 2 air conditioner amplifier connectors.

  1. Engage the 4 clips and install the front passenger seat belt warning light.

  1. Tighten the 2 screws.



3. INSTALL INSTRUMENT PANEL GARNISH RH


    B133887
  1. Engage the 3 clips and install the instrument panel garnish.

  1. Install screw <H>.



4. INSTALL INSTRUMENT PANEL GARNISH LH


    B133886
  1. Engage the 3 clips and install the instrument panel garnish.

  1. Install 2 <H> screws.