Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL GARNISH RH


    B133887
  1. Remove screw <H>.

  1. Disengage the 3 clips and remove the instrument panel garnish.

    NOTICE:
    1. Pull the instrument panel garnish up at an angle of 45° to remove it.
    2. Do not damage the surface of the instrument panel when removing it.



2. REMOVE INSTRUMENT PANEL GARNISH LH


    B133886
  1. Remove screw <H>.

  1. Disengage the 3 clips and remove the instrument panel garnish.

    NOTICE:
    1. Pull the instrument panel garnish up at an angle of 45° to remove it.
    2. Do not damage the surface of the instrument panel when removing it.



3. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY


    B138488
  1. Remove the 2 screws.

  1. Disengage the 4 clips and remove the front passenger seat belt warning light.

  1. Disconnect the 2 air conditioner amplifier connectors and the blower switch connector.



4. REMOVE RADIO RECEIVER ASSEMBLY


    E221529
  1. Remove the 4 bolts and the radio receiver.

  1. Disconnect the connectors.