Home › TRANSMISSION ยท A750E AUTOMATIC TRANSMISSION › TRANSMISSION CONTROL CABLE

TRANSMISSION CONTROL CABLE > REMOVAL

for Preparation Click here



1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B133898E02
  1. Disengage the 2 A claws and 2 B claws.

  1. Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 C claws and remove the parking brake hole cover.



2. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B133897
  1. Shift the shift lever into the N position.

  1. Disengage the 5 clips and 3 claws and remove the console upper rear panel.



3. REMOVE FRONT CONSOLE BOX


    B133851
  1. Remove the 4 <D> bolts.

  1. Disengage the 5 claws and remove the console box.



4. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    C129554
  1. Remove the lock clip and disconnect the control cable from the shift lever.



    C129544
  1. Remove the 2 nuts and disconnect the control cable from the vehicle body.



    C129545
  1. Disengage the 3 claws and disconnect the control cable.



    C129546
  1. Remove the 2 nuts and disconnect the control cable from the vehicle body.



    C129547
  1. Remove the nut and clip then disconnect the control cable.