TRANSMISSION CONTROL CABLE > INSTALLATION |
| 1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Connect the control cable to the transmission with the nut and a new clip.
![]() |
Connect the control cable to the body with the 2 nuts.
![]() |
Engage the 3 claws to connect the control cable.
![]() |
Connect the control cable to the body with the 2 nuts.
![]() |
Connect the control cable with a new lock clip.
| 2. REMOVE FRONT CONSOLE BOX |
![]() |
Engage the 5 claws and install the front console box.
Install the 4 <D> screws.
| 3. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
![]() |
Engage the 3 claws and 5 clips and install the console upper rear panel.
| 4. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
![]() |
Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.
Engage the 4 claws and install the parking brake hole cover.