Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA CORD

RADIO ANTENNA CORD > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY
  1. Connect the connector.

  1. Engage the 4 clamps and install the antenna cord.



2. INSTALL NO. 1 ANTENNA CORD SUB-ASSEMBLY


  1. Apply new double-sided tape to the roof headlining along the markings of the roof headlining.


    E221539E01


    Text in Illustration 
    *1
    Double-sided Tape
    -
    -
    *a
    Marking
    -
    -
    V100136
    Front Side
    -
    -

    NOTICE:
    1. Apply the tape securely in place.
    2. Do not touch the adhesive surface when applying the tape to prevent adhesion failure.



  1. Install the antenna cord as shown in the illustration.


    E221540E01


    Text in Illustration 
    *1
    Marking Tape
    -
    -
    *a
    Marking
    -
    -
    V100136
    Front Side
    -
    -

    NOTICE:
    1. Do not twist the flat antenna cord when installing it.
    2. Securely fix the antenna cord by pressing it.



3. INSTALL ROOF HEADLINING
(Click here)