Home › BODY › INTERIOR › ROOF HEADLINING

ROOF HEADLINING > DISASSEMBLY

for Preparation Click here



1. REMOVE ROOF SPEAKER ASSEMBLY (for 6 Speakers)


B138731E04

HINT:
Use the same procedure for both sides.

Text in Illustration 
*a
for RH Side
*b
for LH Side
  1. Remove the hole cover.



    B135049E04
  1. Disconnect the speaker connector.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side

  1. Loosen the screw.



    B138632E04
  1. Remove the roof speaker by turning it in the direction of the arrow shown in the illustration.
    Text in Illustration 
    *a
    for RH Side
    *b
    for LH Side



2. REMOVE NO. 1 ANTENNA CORD SUB-ASSEMBLY (w/ Satellite Radio)


  1. Remove the antenna cord.


    E221538


    Text in Illustration 
    V100136
    Front Side
    -
    -

  1. Remove the double-sided tape.



3. REMOVE ROOF SILENCER PAD


  1. Remove the roof silencer pad.


    B327684



4. REMOVE NO. 2 ROOF SILENCER PAD


  1. Remove the roof silencer pad.


    B327685



5. REMOVE ROOF HEADLINING PAD (w/o CRAWL)


    B327679
  1. Remove the 2 roof headlining pads.



6. REMOVE ROOF WIRE (w/ CRAWL)


  1. Remove the roof wire.


    B327680E01


    Text in Illustration 
    *A
    w/ Roof Speaker
    *B
    w/o Roof Speaker



7. REMOVE ROOF WIRE (w/o CRAWL)


  1. Remove the roof wire.


    B328474E01


    Text in Illustration 
    *A
    w/ Roof Speaker
    *B
    w/o Roof Speaker