Home › BODY ELECTRICAL › HORN › LOW PITCHED HORN

LOW PITCHED HORN > INSTALLATION

for Preparation Click here



1. INSTALL LOW PITCHED HORN ASSEMBLY


    B130572E01
  1. Install the low pitched horn with the bolt.

    Torque:
    :
    9.8 N*m{ 100 kgf*cm , 7 ft.*lbf }

    NOTICE:
    Do not place the low pitched horn over the stopper of the body.

  1. Connect the horn connector.



2. INSTALL RADIATOR GRILLE
  1. Engage the 5 clips and install the radiator grille.

  1. Install the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. Install the 2 clips.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }