Home › BODY › SEAT › REAR SEAT ASSEMBLY (for LH Side)

REAR SEAT ASSEMBLY (for LH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEATBACK ASSEMBLY


    B130721E01
  1. Engage the hook and temporarily install the rear seatback with the 2 bolts.

  1. Tighten the 2 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

  1. Install the rear center seat inner belt into the rear seatback holder.



2. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY
  1. Engage the 8 clips and install the rear seatback board carpet.

  1. Pull up the rear seatback.



3. INSTALL REAR SEAT CUSHION ASSEMBLY


    B272382E01
  1. Insert the 2 locating pins into the body hole.

  1. Temporarily install the rear seat cushion with the 2 bolts.

  1. Tighten the 2 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }