REAR SEAT ASSEMBLY (for RH Side) > INSTALLATION |
| 1. INSTALL REAR SEATBACK ASSEMBLY |
![]() |
Engage the hook and temporarily install the rear seatback with the 2 bolts.
Tighten the 2 bolts in the sequence shown in the illustration.
Pull up the rear seatback.
![]() |
Install the rear seat inner belt into the rear seatback holder.
| *a | Convex |
Install the anchor plate of the rear center seat outer belt with the bolt.
| 2. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY |
Pull the rear seatback lock release button and tilt the rear seatback forward.
Engage the 10 clips and install the rear seatback board carpet.
Pull up the rear seatback.
| 3. INSTALL REAR SEAT CUSHION ASSEMBLY |
![]() |
Insert the locating pin into the body hole.
Temporarily install the rear seat cushion with the 2 bolts.
Tighten the 2 bolts in the sequence shown in the illustration.