Home › BODY › SEAT › REAR SEAT ASSEMBLY (for RH Side)

REAR SEAT ASSEMBLY (for RH Side) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR SEAT CUSHION HINGE SUB-ASSEMBLY


B267732

HINT:
Use the same procedure for both sides.

  1. Remove the bolt.

  1. Disengage the hook and remove the rear seat cushion hinge.



2. REMOVE REAR SEAT CUSHION UNDER COVER


    B130753E02
  1. Remove the rear seat cushion stopper from the rear seat cushion cover band and the slit of the rear seat cushion under cover.
    Text in Illustration 
    *1
    Band

  1. Using a clip remover, remove the 8 clips and the rear seat cushion under cover.



3. REMOVE REAR SEAT CUSHION STOPPER


    B130754
  1. Remove the screw and the rear seat cushion stopper.



4. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY


    B130755
  1. Disengage the hook and remove the rear seat cushion frame.



5. REMOVE REAR SEAT CUSHION COVER


    B130756
  1. Remove the 10 hog rings and the rear seat cushion cover.



6. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Push the lock button of the rear seat headrest support and remove the rear seat headrest.



7. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
  1. Push the lock button of the rear seat headrest support and remove the rear seat headrest.



8. REMOVE REAR SEAT HEADREST HANDLE


    B271551E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the snap ring and remove the rear seat headrest handle.
    Text in Illustration 
    *1
    Protective Tape



9. REMOVE SHOULDER BELT ANCHOR COVER


    B267854
  1. Disengage the 2 claws and 2 hooks and remove the shoulder belt anchor cover.



10. REMOVE REAR SEAT SHOULDER BELT COVER


    B267855
  1. Disengage the 4 claws and remove the rear seat shoulder belt cover.



11. REMOVE REAR SEATBACK LOCK COVER


    B271143
  1. Remove the screw.

  1. Disengage the guide and remove the rear seatback lock cover.



12. REMOVE TETHER ANCHOR COVER


B130762E02
Text in Illustration 
*1
Protective Tape

HINT:
Use the same procedure for both sides.

  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and open the cover.



    B130764E02
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the tether anchor cover.
    Text in Illustration 
    *1
    Protective Tape



13. REMOVE REAR SEAT HEADREST SUPPORT


    B130766
  1. Remove the 17 hog rings.



    B130769
  1. Disengage the 2 claws and remove the rear seat headrest support.

    HINT:
    Use the same procedure to remove all the rear seat headrest supports.



14. REMOVE REAR SEATBACK LOCK RELEASE BUTTON


    B130773
  1. Remove the rear seatback lock release button.



15. REMOVE REAR SEATBACK STOP BUTTON GROMMET


    B130771
  1. Disengage the 2 claws and remove the rear seatback stop button grommet.



16. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY


    B135129E02
  1. Remove the belt of the rear center seat outer belt from the rear seatback cover band.
    Text in Illustration 
    *1
    Band



    B130768
  1. Remove the rear seatback frame.



17. REMOVE REAR SEATBACK LOCK ASSEMBLY


    B130772
  1. Remove the 2 bolts and the rear seatback lock.



18. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    B135154
  1. Remove the nut and the rear center seat outer belt.



19. REMOVE REAR SEATBACK COVER


    B130774
  1. Pass the hook of the rear seatback cover through the slit in the rear seatback pad.

  1. Remove the 8 hog rings and the rear seatback cover.