FRONT SEAT ASSEMBLY > REASSEMBLY |
| 1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY |
![]() |
Install the front seat side airbag assembly with 2 new nuts.
Engage the 2 clamps.
| 2. INSTALL FRONT SEAT WIRE (for Front Passenger Side) |
![]() |
Install the seat wire with the 4 clamps.
Engage the claw and install the connector.
Connect the 4 connectors.
| 3. INSTALL OCCUPANT CLASSIFICATION ECU (for Front Passenger Side) |
![]() |
Engage the claw and install the occupant classification ECU.
Connect the 2 connectors.
| 4. INSTALL SEAT POSITION SENSOR (for Driver Side) |
![]() |
Install the seat position sensor with the bolt.
| 5. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR |
![]() |
Install the 2 front seat cushion edge protectors.
| 6. INSTALL FRONT SEAT CUSHION LOWER SHIELD RH |
![]() |
Engage the claw and install the front seat cushion lower shield.
| 7. INSTALL FRONT SEAT CUSHION LOWER SHIELD LH |
| 8. INSTALL RECLINING ADJUSTER OUTSIDE COVER RH |
![]() |
Install the reclining adjuster outside cover with the screw.
| 9. INSTALL RECLINING ADJUSTER OUTSIDE COVER LH |
| 10. INSTALL RECLINING ADJUSTER INSIDE COVER RH |
![]() |
Engage the claw and install the reclining adjuster inside cover.
Tighten the screw.
| 11. INSTALL RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Engage the claw and install the reclining adjuster inside cover.
Install the clamp.
Tighten the screw.
| 12. INSTALL VERTICAL SEAT ADJUSTER BUSH (for Driver Side) |
![]() |
Engage the claw and install the vertical seat adjuster bush.
| 13. INSTALL LOWER ACTIVE HEADREST UNIT |
![]() |
Install the lower active headrest unit with the 2 nuts.
| 14. INSTALL UPPER ACTIVE HEADREST UNIT |
![]() |
Connect the lower active headrest unit cable.
Install a new wire harness clamp.
Install the upper active headrest with the 5 nuts.
| 15. INSTALL FRONT SEATBACK COVER |
![]() |
Using hog ring pliers, install the front seatback cover with 5 new hog rings.
| 16. INSTALL FRONT SEATBACK ASSEMBLY |
![]() |
Install the front seatback.
![]() |
Fully cover the airbag with the 2 front seatback cover brackets and tighten the nut.
Using hog ring pliers, install 4 new hog rings.
Install the 2 clips.
![]() |
Fasten the 2 zippers.
Using hog ring pliers, install 2 new hog rings.
![]() |
Insert the front seat side airbag wire harness into the front seatback cover.
![]() |
Using hog ring pliers, install 3 new hog rings.
![]() |
Engage the 3 clamps to connect the front seat side airbag wire harness.
| 17. INSTALL FRONT SEAT HEADREST SUPPORT |
![]() |
Align the protruding portion of the front seat headrest support with the installation groove of the front seatback frame.
Engage the 2 claws and install the front seat headrest support.
| 18. INSTALL FRONT SEAT ARMREST ASSEMBLY (for Driver Side) |
![]() |
Install the bush onto the front seat armrest.
Install the front seat armrest with the bolt.
| 19. INSTALL FRONT SEAT ARMREST CAP (for Driver Side) |
![]() |
Engage the 4 claws and install the front seat armrest cap.
| 20. INSTALL FRONT SEAT ARMREST COVER (for Front Passenger Side) |
![]() |
Engage the 2 claws and install the front seat armrest cover.
| 21. INSTALL FRONT SEAT HEADREST ASSEMBLY |
![]() |
Push in the lock button of the front seat headrest support and install the front seat headrest.
| 22. INSTALL FRONT SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the front seat cushion cover with 12 new hog rings.
| 23. INSTALL FRONT SEAT CUSHION ASSEMBLY |
![]() |
Engage the 2 claws and the 7 hooks and install the front seat cushion.
![]() |
Install the 2 front seatback cover bands.
![]() |
Install the 2 clips.
| 24. INSTALL FRONT SEAT CUSHION INNER SHIELD |
![]() |
Engage the claw and the clip and install the front seat cushion inner shield.
Tighten the screw.
| 25. INSTALL FRONT SEAT INNER BELT ASSEMBLY |
![]() |
Install the front seat inner belt with the bolt.
Install the wire harness into the claw of the front seat cushion inner shield.
![]() |
for Driver Side:
Install the 2 clamps and the 2 connectors.
Connect the seat position sensor connector.
![]() |
for Front Passenger Side:
Install the clamp and the connector.
Connect the buckle switch connector.
| 26. INSTALL FRONT SEAT CUSHION OUTSIDE SHIELD |
![]() |
Engage the 2 claws and the clip and install the front seat cushion outside shield.
Tighten the screw.
| 27. INSTALL RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Engage the claw and install the reclining adjuster release handle.
| 28. INSTALL VERTICAL SEAT ADJUSTER HANDLE (for Driver Side) |
![]() |
Install the vertical seat adjuster handle with the 2 screws.
| 29. INSTALL VERTICAL SEAT ADJUSTER HANDLE COVER (for Driver Side) |
![]() |
Engage the 3 claws and install the vertical seat adjuster handle cover.
| 30. INSTALL VERTICAL SEAT ADJUSTER KNOB (for Driver Side) |
![]() |
Engage the snap ring and install the vertical seat adjuster knob.