Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY

REAR SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B135168E01
  1. for RH Side:

    1. Align the jam hole in the anchor plate of the rear seat inner belt with the stud bolt of the body and provisionally install the anchor plate.

    2. Install the anchor plate of the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

      NOTICE:
      Do not place the anchor plate over the convex areas of the rear seat inner belt.

    3. Install the buckle into the rear seatback pocket.

    4. Install the rear seat cushion.



    B135174E01
  1. for LH Side:

    1. Align the jam hole in the anchor plate of the rear seat inner belt with the stud bolt of the body and provisionally install the anchor plate.

    2. Install the anchor plate of the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

      NOTICE:
      Do not place the anchor plate over the convex areas of the rear seat inner belt.

    3. Install the buckle into the rear seatback band.

    4. Install the rear seat cushion.