Home › BODY ELECTRICAL › AUDIO / VISUAL › INSTRUMENT PANEL SPEAKER

INSTRUMENT PANEL SPEAKER > INSTALLATION

for Preparation Click here


HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.



1. INSTALL FRONT SPEAKER BRACKET (except 10 Speakers)


    E219214
  1. Engage the clamp.

  1. Insert the 2 hooks into the 2 cutouts of the front speaker bracket and install the front No. 2 speaker with the 2 bolts.

    Torque:
    8.1 N*m{ 85 kgf*cm , 72 in.*lbf }



2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    E219215
  1. Connect the speaker connector.

  1. Insert the 2 hooks into the 2 instrument panel holes and install the front No. 2 speaker with the 2 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }



3. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side.