Home › BODY ELECTRICAL › AUDIO / VISUAL › INSTRUMENT PANEL SPEAKER

INSTRUMENT PANEL SPEAKER > REMOVAL

for Preparation Click here


HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.



1. REMOVE INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side.



2. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


    B135131
  1. Remove the 2 bolts and the front speaker.

  1. Disconnect the speaker connector.



3. REMOVE FRONT SPEAKER BRACKET (except 10 Speakers)


    E218763
  1. Disengage the clamp.

  1. Remove the 2 bolts and the front speaker bracket.