Home › BODY ELECTRICAL › AUDIO / VISUAL › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > INSTALLATION

for Preparation Click here


HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.



1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    B130581
  1. Install the front No. 1 speaker with the 4 screws.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }



    B130580
  1. Connect the speaker connector.



2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


B135572
  1. Connect the front door lock remote control cable and front door inside locking cable.



    B331551
  1. Engage the 10 clips and install the front door trim board sub-assembly.

  1. Install the clip.

  1. Install the 2 screws.



    B331549
  1. Engage the 2 claws and close the 2 covers.



3. INSTALL FRONT DOOR ARMREST BASE UPPER PANEL
  1. Connect the all connectors.



    B135557
  1. Engage the 3 claws and the clip and install the front armrest base upper panel.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }