Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT BUMPER EXTENSION LH
  1. Install the front bumper extension LH with the 4 nuts.

    Torque:
    65 N*m{ 663 kgf*cm , 48 ft.*lbf }



2. INSTALL FRONT BUMPER EXTENSION RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL FRONT SUSPENSION MEMBER DAMPER ASSEMBLY (w/ Performance Damper)
  1. Install the front suspension member damper assembly with the 2 nuts.

    Torque:
    65 N*m{ 663 kgf*cm , 48 ft.*lbf }

    NOTICE:
    Do not compress or extend the front suspension member damper assembly or rotate the rod.



4. INSTALL FRONT BUMPER REINFORCEMENT
  1. Install the front bumper reinforcement with the 4 nuts.

    Torque:
    65 N*m{ 663 kgf*cm , 48 ft.*lbf }



5. INSTALL FRONT BUMPER UPPER RETAINER
  1. Engage the 2 hooks and install the front bumper upper retainer.

  1. Install the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



6. INSTALL FRONT BUMPER FILLER LH
  1. Engage the clip and the 2 claws and install the front bumper filler LH.



7. INSTALL FRONT BUMPER FILLER RH

HINT:
Use the same procedure as for the LH side.



8. INSTALL FRONT BUMPER SIDE SUPPORT LH
  1. Engage the 2 claws and install the front bumper side support LH.

  1. Install the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



9. INSTALL FRONT BUMPER SIDE SUPPORT RH

HINT:
Use the same procedure as for the LH side.



10. INSTALL FRONT BUMPER COVER
  1. Install the 4 clips.

  1. Engage the 2 claws and install the front bumper cover.



    B134732
  1. Install the 8 screws and the 4 bolts.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf } for screw
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf } for bolt

  1. Install the 5 clips.

  1. Remove the protective tape.



11. INSTALL RADIATOR GRILLE
  1. Engage the 5 clips and install the radiator grille.

  1. Install the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. Install the 2 clips.