Home › BODY › EXTERIOR › REAR BUMPER

REAR BUMPER > REMOVAL

for Preparation Click here



1. REMOVE REAR BUMPER COVER


    B135140E02
  1. Apply protective tape as shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape



    B135141
  1. Remove the 7 bolts and the 2 screws.



    B268275
  1. Disengage the clamp and disconnect the floor wire.

  1. Disconnect the connector.

    HINT:
    If the vehicle is equipped with back sonar, disconnect the connector and floor wire.



    B135143
  1. Disengage the 6 claws and the 2 clips and remove the rear bumper cover.



2. REMOVE REAR BUMPER END RETAINER LH


    B134750
  1. Remove the screw.

  1. Disengage the 2 claws and remove the rear bumper end retainer.



3. REMOVE REAR BUMPER END RETAINER RH

HINT:
Use the same procedure as for the LH side.



4. REMOVE REAR BUMPER UPPER RETAINER LH


    B134751
  1. Remove the 2 screws.

  1. Disengage the 3 claws and remove the rear bumper upper retainer.



5. REMOVE REAR BUMPER UPPER RETAINER RH

HINT:
Use the same procedure as for the LH side.



6. REMOVE REAR BUMPER ENERGY ABSORBER


    B134752
  1. Disengage the 2 claws and remove the rear bumper energy absorber.



7. REMOVE REAR BUMPER SIDE STAY LH


    B138423
  1. Remove the bolt and the rear bumper side stay.



8. REMOVE REAR BUMPER SIDE STAY RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY LH


    B135071
  1. Remove the 2 bolts and the rear bumper side support.



10. REMOVE REAR BUMPER SIDE SUPPORT SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



11. REMOVE REAR BUMPER BAR BRACKET LH


    B138424
  1. Remove the bolt and the rear bumper bar bracket.



12. REMOVE REAR BUMPER BAR BRACKET RH

HINT:
Use the same procedure as for the LH side.