NAME PLATE > REMOVAL |
| 1. REMOVE NO. 1 BACK DOOR NAME PLATE |
![]() |
Apply protective tape to the back door panel in the area around the No. 1 back door name plate.
Using an infrared light, heat the No. 1 back door name plate.
![]() |
Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the No. 1 back door name plate.
Remove the protective tape.
| 2. REMOVE NO. 2 BACK DOOR NAME PLATE |
![]() |
Apply protective tape to the back door panel in the area around the No. 2 back door name plate.
Using an infrared light, heat the No. 2 back door name plate.
![]() |
Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the No. 2 back door name plate.
Remove the protective tape.
| 3. REMOVE REAR NAME PLATE |
![]() |
Apply protective tape to the back door panel in the area around the rear name plate.
Using an infrared light, heat the rear name plate.
![]() |
Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the rear name plate.
Remove the protective tape.