BACK WINDOW LOCK > INSPECTION |
| 1. INSPECT BACK WINDOW LOCK |
![]() |
Check the operation of the back window lock actuator.
Connect the cable from the positive (+) battery lead to terminal 4 and the negative (-) battery lead to terminal 3, then check the operation of the actuator.
![]() |
Check the resistance of the back door window courtesy switch.
Using an ohmmeter, measure the resistance between the terminals when the latch is operated with a screwdriver.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Unlocked | Below 1 Ω |
| 1 - 2 | Locked | 10 kΩ or higher |