Home › BODY ELECTRICAL › DOOR LOCK › WIRELESS DOOR LOCK BUZZER

WIRELESS DOOR LOCK BUZZER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY


    B136004
  1. Disengage the 6 clips.



    B138136
  1. Disengage the 3 clips and remove the front fender splash shield.



3. REMOVE NO. 1 WIRING HARNESS PROTECTOR


    B138137
  1. Disengage the 4 claws and remove the No. 1 wiring harness protector.



4. REMOVE WIRELESS DOOR LOCK BUZZER


    B138138
  1. Disengage the clamp of the wireless door lock buzzer.



    B138139
  1. Disconnect the connector and remove the wireless door lock buzzer.