Home › BODY › MIRROR › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > INSTALLATION

for Preparation Click here



1. INSTALL OUTER REAR VIEW MIRROR ILLUMINATION LIGHT BULB (w/ Illumination)


E127191
  1. Install the outer rear view mirror illumination light bulb into the light socket.

  1. Turn the outer rear view mirror illumination light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.



2. INSTALL OUTER REAR VIEW MIRROR


B138151
  1. Engage the 2 claws on the upper side of the mirror and the 6 clips and install the mirror.

    HINT:
    Heating the mirror holder with a domestic dryer before this procedure makes the work easier.



    B135564
  1. Install the outer rear view mirror with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the connector.



3. INSTALL NO. 2 FRONT DOOR SERVICE HOLE COVER

HINT:
Use the same procedure as for the RH side .



4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side .



5. INSTALL FRONT ARMREST BASE UPPER PANEL
  1. Connect the connector.

  1. Engage the 3 claws and clip and install the front armrest base upper panel.



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }