Home › SUSPENSION & AXLE › SUSPENSION › REAR UPPER ARM

REAR UPPER ARM > INSTALLATION

for Preparation Click here



1. TEMPORARILY TIGHTEN REAR UPPER CONTROL ARM


D028138
  1. Install the upper control arm and temporarily tighten the nut, washer and bolt.



    D028137
  1. Install the upper control arm and temporarily tighten the nut, washer and bolt.



2. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



3. FULLY TIGHTEN REAR UPPER CONTROL ARM


D028140E01
  1. Fully tighten the 2 nuts.

    Torque:
    80 N*m{ 816 kgf*cm , 59 ft.*lbf }

    HINT:
    While fixing the bolt, turn and install the nut.